Joiner in Pertuis: windows, shutters and doors, made to measure

What I come to do à Pertuis

Pertuis is the main town of the area, and by far the town with the most enquiries: old centre, suburban districts, recent estates and apartment blocks.

In houses built from the 1980s to 2000s, the joinery wears out at the same time: replacing the windows and roller shutters of one facade, then the next, costs less than doing it room by room and keeps the colours consistent from the street. In the old town centre, the openings are irregular and sometimes in a protected area: there, the survey and the prior declaration matter as much as the product.

In town every job takes a little more preparation than in the countryside: access, parking, floors, and sometimes a managing agent to notify. Once those details are settled the replacement goes smoothly, facade by facade. Estate houses often offer the simplest job: four to six openings of the same model, one day to remove and refit, and the home stays liveable throughout.

• Aluminium and PVC window replacement, insulation included
• Aluminium or PVC roller shutters, manual or electric
• Front doors, garage doors and swing gates

A joinery job in Pertuis, from the first call to the fitting

Replacing windows is not only about the product: what makes the difference is the preparation — the measurements, the paperwork, the order the facades are done in — and then the fitting. Here is how a job runs here, in the order things actually happen.

1. The first call Describe the house and what is no longer working: how many openings, which floor, whether the shutters are being kept. A few photos inside and out help spot the awkward cases — French door, corner opening, recessed shutter — even before the visit.
2. The visit and the measuring up I come and measure every opening, check that the reveals are plumb and see what the wall is made of. This is when we choose the material, the colour and the glazing together, with the colour charts and profile sections in hand.
3. The itemised quote Line by line: supply, removal of the old units, fitting, trims, hardware, shutters when the job includes them. The price quoted is the price paid, with no extra appearing on the day of fitting.
4. The paperwork A like-for-like replacement, same size and same colour, usually needs no formality. If the appearance changes, a prior declaration has to be filed at the town hall — and in the old centre of Pertuis the planning office may impose a colour. In a block of flats, the vote of the general meeting and informing the managing agent are needed. I provide the technical documents for the file: dimensions, design, colours.
5. Manufacture The joinery is made to the measurements taken, not taken off a shelf. The lead time depends on that manufacture; it is stated on the quote, and nothing is ordered without your written approval.
6. Fitting, room by room One room or one facade at a time, so the house stays liveable: removal, packing, foam and seals, trims inside and out, adjusting the sashes, cleaning the site before leaving.
7. After the fitting The adjustments that come with use — a sash rubbing when the season changes, a handle to tighten — are done on site, at no cost, on the next visit to the area.

What changes the price of joinery in Pertuis

Two neighbouring houses, windows that look alike, and two very different quotes: that is normal, and almost always explainable. These are the items that really weigh.

• The number and size of the openings. A 215 × 215 French door and a 60 × 60 window need neither the same profile nor the same hardware.
• The material. PVC is the cheapest at equal performance; aluminium, slimmer, allows larger sizes and costs more.
• The glazing. Standard double glazing, solar-control glass for a south-facing facade, acoustic reinforcement on the street side: each option costs, but each is felt every day.
• The shutters. Keeping them, motorising them or replacing them changes the budget as much as the windows themselves — hence the value of doing both together.
• Access. A second floor with no lift, a sloping yard, difficult parking in the old centre: handling has to be planned and is paid for.
• The building. Uneven reveals, lintels to redo, thick walls: more fitting time, sometimes made-to-measure trim.

The quote details each of these items, which lets you compare two proposals for the same work — and decide where to put the budget: the number of openings first, the material next.

Aluminium or PVC, for a house in Pertuis

PVC double glazing is the most common choice in the estates built from the 1980s to 2000s around Pertuis: good insulation, no maintenance, moderate price. The profiles are wider than aluminium, which hardly shows on a standard opening and shows a lot on a large patio door.

Aluminium keeps its place in the old centre and on generous openings: slim profiles that let the light in, larger sizes, dark colours or a woodgrain finish that blend into the stone, and no repainting to plan for.

On site I show both colour charts and profile sections, and I say plainly which one suits your house best — a stone facade and an estate house do not call for the same joinery.

Six questions to ask before signing a joinery quote

Joinery quotes can only be compared for the same work: otherwise the price means nothing. These six questions can be put to any craftsman — myself included — and the answers fit in one sentence, not a paragraph.

• Are removal and disposal included? Removing the old joinery, protecting the floors, taking it to the tip: that is a line item in its own right. A quote that leaves it out is not cheaper, it is incomplete.
• Are the inside and outside trims included? Without trims, the fitting leaves plastering and facade repairs on your side. The quote must state which are supplied, and in what material.
• Exactly which glazing, for which orientation? The glazing reference — solar control to the south, acoustic on the street side, safety on the ground floor — has to be written down. Two double-glazed units that look the same are not equal.
• Are the shutters reused, adapted or replaced? A thicker window shifts the shutter and its box. The question is settled on the quote, not on the day of fitting.
• Who prepares the prior declaration if the appearance changes? In a protected area or a block of flats, the documents and the approval are part of the preparation. Better to know who handles it before ordering.
• What happens if a measurement does not come out right? A survey done on site limits the risk. The answer must say what is remade, and on what terms — with no extra charge discovered on delivery.

If a quote stays vague on these points, it was often drawn up without a visit — and that is where nasty surprises come from.

Repairs and adjustments in Pertuis

Not everything gets replaced. A shutter that will not roll up, a motor that strains, cracked glazing, a door that rubs or a lock that catches are often sorted in one visit: I come to Pertuis on the way back from another job — the advantage of being a quarter of an hour away.

When the joinery is at the end of its life — swollen timber, cracked profile, single glazing everywhere — I say so and quote the replacement, rather than piling up repairs that will not last.

The services

Every type of joinery has its own page — materials, options, how the job runs and frequently asked questions. These are the same units fitted in Pertuis qu'ailleurs in the area.

Le détail par prestation à Pertuis

What changes here, district by district, product by product:

Fenêtres PVC et aluminium à Pertuis Volets roulants et battants à Pertuis Portes d'entrée à Pertuis

Frequently asked questions à Pertuis

Can the windows of a condo flat be changed?

Yes: joinery opening to the outside can be replaced, with the building association’s approval if the look changes. I provide a detailed quote for the property manager and stick to the approved colours.

How long does a whole-house replacement take?

It depends on the number of sashes, but the home stays liveable: one room or one facade at a time. A single sash takes a few hours, a room within the day.

Are replacement windows eligible for renovation grants?

Yes, double glazing fitted as a renovation can qualify for grants depending on energy performance and the age of the home. I prepare a quote to current standards and point out the grants available before you sign.

Do you fit motorised roller shutters in Pertuis?

Yes: aluminium or PVC roller shutters, wired or radio motors, fitted and adjusted. A shutter that no longer rolls up can often be repaired on site (hardware, motor) — no need to replace the whole thing.

Do you need permission to change windows in Pertuis?

It depends what changes. A like-for-like replacement — same size, same design, same colour — generally needs no paperwork. If the appearance changes, a prior declaration has to be filed at the town hall; in the old centre, the planning office may impose a colour. I provide the technical documents for the file.

How long between the quote and the fitting in Pertuis?

The lead time depends on making the joinery to the measurements taken, then on the fitting slot. It is stated on the quote and nothing is ordered without your written approval: in the meantime, you always know where the job stands.

How does a job in the old centre work, with parking?

Access is planned at the visit: width of the lanes, floor, the route the units take, where to put the van. When needed, we agree a delivery time with the town hall or the neighbours — the lane is only blocked while unloading.